Bench essentialsResearch pick
NA-FC1 PWM fan controller
NA-FC1
Set bench airflow with a manual PWM dial or trim a motherboard's fan-control signal.
- Interface
- 4-pin PWM
- Format
- Fan control accessory
LAB / iFixitHARDWARE EDIT
Category illustration · not a product photograph
BENCH ESSENTIALS / IF145-202-5
Portable anti-static mat
A foldable work surface with a wrist strap and ground connection for handling cards.
IN YOUR WORKFLOWESD-conscious card handling
As an Amazon Associate I earn from qualifying purchases. Amazon links are paid links. Check current price, seller and availability on Amazon.
Amazon listing unverified; this link searches the exact model. Live availability is unverified. Confirm stock, seller, exact model and price on Amazon.
THE DETAILS THAT MATTER
At a glance.
- Brand
- iFixit
- Model
- IF145-202-5
- Interface
- Grounding clip and wrist strap
- Form factor
- 60 × 60 cm mat
- Dimensions
- 60 × 60 cm
- Construction
- Polyester
- Included
- Grounding wire and wrist strap
ESD & setup method
Keep handling and test conditions repeatable.
Portable anti-static mat supports the physical handling routine for the build. Pair the manufacturer’s grounding instructions with a clear record of each hardware change.
- Set up the mat or wrist strap using its manufacturer’s instructions and the approved grounding point for your workspace.
- Record board, slot and adapter positions before reseating or replacing a component; power down as the equipment documentation requires.
- Keep a known-good Header7F capture for the PCIe device, when one is present, and take a comparable capture after the hardware change.
Header7F cannot measure ESD protection or verify the grounding path. An anti-static accessory does not replace the equipment’s electrical safety instructions.