NetworkingResearch pick
StarTech Gigabit Ethernet adapter
ST1000SPEX2
Add a dedicated wired management interface to a desktop test machine.
- Interface
- PCIe x1
- Format
- Standard height + low-profile bracket
NET / StarTech.comHARDWARE EDIT
Category illustration · not a product photograph
NETWORKING / ST10GSPEXNDP2
StarTech Dual-port Marvell 10GbE adapter
Bring two independent multi-gigabit copper interfaces to a development workstation.
IN YOUR WORKFLOWNetwork and traffic lab
As an Amazon Associate I earn from qualifying purchases. Amazon links are paid links. Check current price, seller and availability on Amazon.
Amazon listing unverified; this link searches the exact model. Live availability is unverified. Confirm stock, seller, exact model and price on Amazon.
THE DETAILS THAT MATTER
At a glance.
- Brand
- StarTech.com
- Model
- ST10GSPEXNDP2
- Interface
- PCIe x4
- Form factor
- Standard height + low-profile bracket
- Ports
- 2
- Connection
- RJ45
- Link rate
- 10 Gbps per port
- Controller
- Marvell - AQC113CS
Direct PCIe evidence
Separate the host link from the network link.
StarTech Dual-port Marvell 10GbE adapter has two different links to check: PCIe inside the computer and Ethernet outside it. Start with the host evidence before blaming the cable or switch.
- Find the NIC’s current PCI address on Linux. Run the Header7F collector for that address and import the reviewed JSON into the workbench.
- Check identity, bound driver, allocated resources and current versus maximum PCIe speed and width. Compare both link partners and a known-good state.
- Add relevant, time-bounded AER or IOMMU log lines. Check Ethernet negotiation and traffic separately with the operating system and the NIC’s supported tools.
PCIe speed is not Ethernet speed. Header7F does not measure network throughput, configure the NIC or prove that DMA completed.