Adapters & risersResearch pick
Hyper M.2 x16 Gen 4 Card
Hyper M.2 x16 Gen 4
A four-drive carrier for exploring multiple NVMe endpoints on a bifurcated slot.
- Interface
- PCIe 4.0 x16
- Format
- PCIe x16 card
LINK / AdafruitHARDWARE EDIT
Category illustration · not a product photograph
ADAPTERS & RISERS / 2264
FT232H USB-C breakout
Bring SPI, I2C and GPIO to a computer for simple control and peripheral experiments.
IN YOUR WORKFLOWLow-speed peripheral bring-up
As an Amazon Associate I earn from qualifying purchases. Amazon links are paid links. Check current price, seller and availability on Amazon.
Amazon listing unverified; this link searches the exact model. Live availability is unverified. Confirm stock, seller, exact model and price on Amazon.
THE DETAILS THAT MATTER
At a glance.
- Brand
- Adafruit
- Model
- 2264
- Interface
- USB-C to FT232H MPSSE
- Form factor
- Breakout board
- Chip
- FT232H
- Protocols
- SPI / I2C / UART / GPIO
- Footprint
- 23 × 38 mm
- Connector
- STEMMA QT
Board & reproducibility method
Establish a known-good programming baseline.
FT232H USB-C breakout uses its own board, serial or programming tools. Header7F’s reproducibility method helps preserve the firmware, wiring and exact stimulus around a failure.
- Check the target voltage, pinout, firmware and supported programming software. Confirm a small known-good board example first.
- Record the source revision, tool version, wiring and exact command or input that reproduces the symptom.
- Apply Header7F’s run-manifest approach to keep the logs, setup and failing case together; if your design includes AXI logic, use its separate handshake guides.
Header7F does not connect to USB/UART, flash firmware, debug JTAG/SWD or decode SPI/I2C. Its protocol examples apply only to the interfaces they describe.