Cables & opticsResearch pick
10G passive SFP+ DAC 1m
SFP10GPC1M
A short copper link for connecting a NIC to an adjacent switch without separate optics.
- Interface
- SFP+ to SFP+
- Format
- 1 m twinax cable
I/O / AnkerHARDWARE EDIT
Category illustration · not a product photograph
CABLES & OPTICS / A8866
765 USB-C 140W nylon cable
A power-oriented cable that also carries the USB 2.0 data used by many console bridges.
IN YOUR WORKFLOWPower and low-speed USB
As an Amazon Associate I earn from qualifying purchases. Amazon links are paid links. Check current price, seller and availability on Amazon.
Amazon listing unverified; this link searches the exact model. Live availability is unverified. Confirm stock, seller, exact model and price on Amazon.
THE DETAILS THAT MATTER
At a glance.
- Brand
- Anker
- Model
- A8866
- Interface
- USB 2.0 / USB PD 3.1
- Form factor
- USB-C to USB-C cable
- Power
- Up to 140 W
- Data Rate
- 480 Mb/s
- Construction
- Nylon braid
Host-side correlation
Isolate the cable from the device.
765 USB-C 140W nylon cable is part of the physical connection, rather than a separately captured PCIe function. Keep the connected device and host path explicit when checking a cable swap.
- Check the connector types, documented data capability and power requirements. Establish a known-good direct connection before adding adapters.
- Change one cable or port at a time and use the connected device’s supported software to observe the symptom.
- If a PCIe controller is involved, collect its separate host evidence in the Header7F workbench and preserve the before/after setup notes.
Header7F does not test cable continuity, USB/Thunderbolt data rate, optical power or SATA signal quality. A host capture cannot prove that this cable is good.