Cables & opticsResearch pick
10G passive SFP+ DAC 1m
SFP10GPC1M
A short copper link for connecting a NIC to an adjacent switch without separate optics.
- Interface
- SFP+ to SFP+
- Format
- 1 m twinax cable
I/O / SabrentHARDWARE EDIT
Category illustration · not a product photograph
CABLES & OPTICS / CB-SFK3
Locking SATA data cables, three-pack
Keep several bare SATA drives wired while minimizing accidental cable movement.
IN YOUR WORKFLOWSATA bench cabling
As an Amazon Associate I earn from qualifying purchases. Amazon links are paid links. Check current price, seller and availability on Amazon.
Amazon listing unverified; this link searches the exact model. Live availability is unverified. Confirm stock, seller, exact model and price on Amazon.
THE DETAILS THAT MATTER
At a glance.
- Brand
- Sabrent
- Model
- CB-SFK3
- Interface
- SATA data
- Form factor
- 20-inch cable, three-pack
- Data Rate
- SATA III, 6 Gb/s
- Connectors
- Straight with locking latches
- Pack
- 3 cables
- Length
- 20 inches
Host-side correlation
Isolate the cable from the device.
Locking SATA data cables, three-pack is part of the physical connection, rather than a separately captured PCIe function. Keep the connected device and host path explicit when checking a cable swap.
- Check cable direction, connector/keying and separate drive power. Follow the controller/backplane documentation for breakout compatibility.
- Change one cable or port at a time and use the connected device’s supported software to observe the symptom.
- If a PCIe controller is involved, collect its separate host evidence in the Header7F workbench and preserve the before/after setup notes.
Header7F does not test cable continuity, USB/Thunderbolt data rate, optical power or SATA signal quality. A host capture cannot prove that this cable is good.