Cables & opticsResearch pick
10G passive SFP+ DAC 1m
SFP10GPC1M
A short copper link for connecting a NIC to an adjacent switch without separate optics.
- Interface
- SFP+ to SFP+
- Format
- 1 m twinax cable
I/O / StarTech.comHARDWARE EDIT
Category illustration · not a product photograph
CABLES & OPTICS / USB2AC1M
USB-A to USB-C data cable 1m
A conventional host cable for USB-C development boards and serial adapters.
IN YOUR WORKFLOWUSB serial bridge cabling
As an Amazon Associate I earn from qualifying purchases. Amazon links are paid links. Check current price, seller and availability on Amazon.
Amazon listing unverified; this link searches the exact model. Live availability is unverified. Confirm stock, seller, exact model and price on Amazon.
THE DETAILS THAT MATTER
At a glance.
- Brand
- StarTech.com
- Model
- USB2AC1M
- Interface
- USB 2.0
- Form factor
- 1 m USB-A to USB-C
- Data Rate
- 480 Mb/s
- Length
- 1 m
- Host Connector
- USB-A
- Device Connector
- USB-C
Host-side correlation
Isolate the cable from the device.
USB-A to USB-C data cable 1m is part of the physical connection, rather than a separately captured PCIe function. Keep the connected device and host path explicit when checking a cable swap.
- Check the connector types, documented data capability and power requirements. Establish a known-good direct connection before adding adapters.
- Change one cable or port at a time and use the connected device’s supported software to observe the symptom.
- If a PCIe controller is involved, collect its separate host evidence in the Header7F workbench and preserve the before/after setup notes.
Header7F does not test cable continuity, USB/Thunderbolt data rate, optical power or SATA signal quality. A host capture cannot prove that this cable is good.