PrototypingResearch pick
Arduino UNO Rev3
UNO Rev3
A well-documented controller board for generating test traffic and prototyping peripheral circuits.
- Interface
- USB-B / GPIO
- Format
- UNO development board
BUILD / STMicroelectronicsHARDWARE EDIT
Category illustration · not a product photograph
PROTOTYPING / STLINK-V3MINIE
STMicroelectronics STLINK-V3MINIE
A small standalone STM32 debug probe for compact development setups.
IN YOUR WORKFLOWDebug an STM32 target
As an Amazon Associate I earn from qualifying purchases. Amazon links are paid links. Check current price, seller and availability on Amazon.
Amazon listing unverified; this link searches the exact model. Live availability is unverified. Confirm stock, seller, exact model and price on Amazon.
THE DETAILS THAT MATTER
At a glance.
- Brand
- STMicroelectronics
- Model
- STLINK-V3MINIE
- Interface
- USB / SWD / JTAG
- Form factor
- Compact debug probe
- Target family
- STM32
- Functions
- Programming / debugging
- Probe format
- Miniature standalone
Board & reproducibility method
Establish a known-good programming baseline.
STMicroelectronics STLINK-V3MINIE uses its own board, serial or programming tools. Header7F’s reproducibility method helps preserve the firmware, wiring and exact stimulus around a failure.
- Check the target voltage, pinout, firmware and supported programming software. Confirm a small known-good board example first.
- Record the source revision, tool version, wiring and exact command or input that reproduces the symptom.
- Apply Header7F’s run-manifest approach to keep the logs, setup and failing case together; if your design includes AXI logic, use its separate handshake guides.
Header7F does not connect to USB/UART, flash firmware, debug JTAG/SWD or decode SPI/I2C. Its protocol examples apply only to the interfaces they describe.