Test & measurementResearch pick
RIGOL DHO802
DHO802
A compact bench scope for seeing rail behavior, ringing and the shape of digital edges.
- Interface
- BNC / USB / LAN
- Format
- Bench oscilloscope
TEST / FlukeHARDWARE EDIT
Category illustration · not a product photograph
TEST & MEASUREMENT / 101
Fluke 101
A small meter for continuity and voltage checks when first powering a board.
IN YOUR WORKFLOWCheck rails and connections
As an Amazon Associate I earn from qualifying purchases. Amazon links are paid links. Check current price, seller and availability on Amazon.
Amazon listing unverified; this link searches the exact model. Live availability is unverified. Confirm stock, seller, exact model and price on Amazon.
THE DETAILS THAT MATTER
At a glance.
- Brand
- Fluke
- Model
- 101
- Interface
- Test leads
- Form factor
- Handheld digital multimeter
- Voltage range
- Up to 600 V AC/DC
- Safety rating
- CAT III 600 V
- Display
- 6,000 counts
- Functions
- Voltage / resistance / continuity
Bench measurement method
Record power before chasing logic.
Fluke 101 helps you check the low-voltage bench conditions around a board. Keep those measurements alongside your digital investigation so a changed power setup is visible.
- Follow the meter and board documentation for the measurement mode, connection points and ratings; record the expected rail from the board documentation.
- Record the measured rail, ground reference, board revision and power source before and after the symptom. A DC reading is not a startup waveform.
- Use Header7F’s reproducibility guide to preserve the test setup. If you later investigate a PCIe card, import its separate host capture into the workbench.
Header7F does not receive meter readings, measure voltage or diagnose a power supply. A steady DC reading cannot prove clock/reset timing or the absence of short transients.