FPGA boardsProduct link
Digilent Basys 3
Basys 3
A teaching board with onboard controls for learning RTL without building the first peripheral circuit.
- Interface
- USB / Pmod
- Format
- FPGA development board
FPGA / DigilentHARDWARE EDIT
Category illustration · not a product photograph
FPGA BOARDS / Arty S7-25
Digilent Arty S7-25
A Spartan-7 board with familiar expansion connectors for low-power digital projects.
IN YOUR WORKFLOWPrototype RTL and peripherals
As an Amazon Associate I earn from qualifying purchases. Amazon links are paid links. Check current price, seller and availability on Amazon.
Amazon product link identified; the current listing is unverified. Live availability is unverified. Confirm stock, seller, exact model and price on Amazon.
THE DETAILS THAT MATTER
At a glance.
- Brand
- Digilent
- Model
- Arty S7-25
- Interface
- USB / Pmod / Arduino headers
- Form factor
- FPGA development board
- Logic slices
- 3,650
- DSP slices
- 80
- External clocks
- 100 MHz / 12 MHz
Simulation & bench method
Make the first handshake visible.
Digilent Arty S7-25 is a USB-programmed development board, rather than a PCIe add-in card. Start with a small known-good design, then make your own interface behavior easy to inspect.
- Use the board’s documented programming flow, correct data cable and voltage limits. First confirm a known-good LED or UART design with the vendor tools.
- For an AXI design, use Header7F’s address/data and backpressure guides to plan separate AW/W arrivals and held responses. Observe internal signals with simulation or the FPGA vendor’s logic analyzer.
- Compare your observations with the labelled synthetic timing examples. Save the design revision, constraints, clock/reset setup and exact failing stimulus so the behavior can be replayed.
Header7F does not program this board or connect to USB, JTAG or its internal analyzer. The example trace monitor uses the documented trace format; the site does not import arbitrary instrument captures.